Our In-house Fastener Handling Facility
.
Our Facility at Glance:
| Special Bolts Manufacturing | Automatic turnings, Thread rolling Machines |
| Special Nut Manufacturing | Automatic Turnings, Thread cutting Machines |
| Washer Manufacturing | Power presses for punching & stamping |
| Fastener Stocking facility | Facility to maintain Fastener Stock in Racks Average stock: > 1500 tone |
| Dedicated Fastener quality check area | Intensive quality check tables for 30+ personals: For plating, for fasteners shorting, |
| Zinc plating | Zinc & Zi-Ni Alloy plating Plant |
| Zinc-Flake Plating | Zinc-Flake plating Plant for corrosion protection SST > 1000 Hours |
| Final Packing | Professional Packing & kit wise labelling facility |
| Quality Control Facility for Fasteners | Dedicated Quality control facility for Fastner’s division with Tensile, impact & Hardness testing equipment, Torque testing, |
| Quality Control Facility for Coatings | Plating Thickness Measurements, Cross hatch Plating Adhesion testing as per ISO 2409/ ASTM D 3359, Salt Spray Testing Chamber as per ISO 9227/ASTM B117, Chemicals checking laboratory, Accelerated corrosion testing |
Quality documents to be supplied along
- Dimensional Check Reports
- Material & Mechanical test certifications
- Type of Plating & Plating thickness certification
- Plating adhesion test reports
- REACH & RoHS conformity
Photo Gallery
Our Regular supplied Standards, Grade & Sizes of High tensile fasteners:
| DESCRIPTION | DIN STANDARD | ISO STANDARD | GRADE | SIZE RANGE | |||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Bolts / Screws | |||||||||||
 |
Hex Bolts / Screw | DIN 933 | ISO 4017 | 8.8 – 10.9 | M4 – M36 | ||||||
 |
Hex Bolt / Screw Partial threaded | DIN 931 | ISO 4014 | 8.8 – 10.9 | M4 – M36 | ||||||
 |
Hex Bolt/Screw Fine Thread | DIN 961 / 960 | ISO 8765/8676 | ||||||||
 |
Hex Flange Bolts | DIN 6921 | 8.8 – 10.9 | M4 – M20 | |||||||
 |
Socket Head Screws | DIN 912 | ISO 4762 | 8.8 – 10.9 | M4 – M20 | ||||||
| Button Head Socket Screws | 4.6 – 8.8 | ||||||||||
 |
Phillips Pan Head Screws | DIN 7985 | 4.6 – 8.8 | M2 – M8 | |||||||
 |
Slotted Cheese Head Screws | DIN 84 | 4.6 – 8.8 | M2 – M8 | |||||||
 |
Carriage Bolts | DIN 603 | 4.6 – 8.8 | M5 – M10 | |||||||
Nuts
 |
Hex Nuts | DIN 934 | 50 – 70 | M4 – M36 | |
 |
Hex Thin Nut / Jam Nut | DIN 936 | 50 – 70 | M4 – M36 | |
 |
Flange Nut | DIN 6923 | 50 – 70 | M4 – M12 | |
 |
Taper Lock Nut | DIN 980 V | 50 – 70 | M4 – M12 | |
 |
Nylon Lock Nut | DIN 985 | 50 – 70 | M4 – M12 | |
 |
Dom Nut / Acorn Nut | DIN 1587 | 50 – 70 | M4 – M12 | |
| Anti Theft Nut | 50 – 70 | M4 – M12 |
Washers
 |
Flat Washer | DIN 125 | ISO 7089/7090 | V2A | M4 – M36 |
 |
Lock Washer | DIN 127 | V2A | M4 – M36 | |
 |
Square Washer | DIN 434 | V2A | M4 – M36 | |
| Large OD Flat Washers | V2A | M4 – M36 |
Other articles
 |
Threaded Rod / Bar | DIN 975 | 50 – 70 | M4 – M36 | |
 |
Eye Bolts | DIN 580 | V2A | M4 – M36 |